Poll: ADS-B in, in/out, display

[uk_figs]

Since I was happy with my D100/D120 setup I opted for the GDL39 and upgraded my 496 to a 796. Works well. I also have the GDL39 connected to the iPad.
In my case I did not want to spend the $$ or take on a major panel upgrade at this time and I wanted some portability as I am starting another project (low and slow), the GDL39/796 fit the bill.

[dmaib]

Originally Posted by jclark

What settings did you use on the GTX330?
(Pin 22 or 24? <Channel 1 or 2>)
("GPS" or one of the other choices)

And from the 430W what is the signal stream defined as?
(Will be using data stream from HXr for the moment so trying to figure out the right correlation.)

THANKS!

James

James, PM sent

[Rodoc]

Bob,
What software are you using on your iPad with the Navworx? I am using the navworx with a win-doze tablet and am thinking about trying out the iPad.

[Jesse]

We now have the NavWorx box up and running in the -9A. It is pretty impressive. The setup is a breeze compared to the last time I set it up using the command console instead of their new UAT program. The traffic displays very nicely on the GRT WS and the Radar showed as well. I didn't spend much time with it, but it's nice knowing that we have all of the information now, and now we will get full local traffic on the Stratus in Foreflight with ADS-B out in both planes. Should get my first cross-country flight with that combination tomorrow. I'm looking forward to it.

[rleffler]

Originally Posted by Rodoc

Bob,
What software are you using on your iPad with the Navworx? I am using the navworx with a win-doze tablet and am thinking about trying out the iPad.

Hilton WingX

[Strasnuts]

GTS800 for ADS-b in
GTX330 (es) for ADS-b out
3 Screen G3X panel with 430W