What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Efii Fuel pump /Bonaco lines

Jackm

Well Known Member
Installed Efii fuel pump and lines. I removed all floor brackets and installed doubler from below Andair fuel valve to firewall. Fabricated fuel pump brackets and insulated floor with standard insulation and two layers of Fiberfrax to floor and tunnel side. Going to replace fuel hose from valve to pump due to it being 1/2 inch too short.
Anyone see any issues with this layout?
Thanks

XM0riqWUB-UFehNI6PZ2cn570lagGalaq40hbRRwIMk_zps8763ac8b.jpg.html

XM0riqWUB-UFehNI6PZ2cn570lagGalaq40hbRRwIMk_zps8763ac8b.jpg.html
 
Jack,

Mine is similar except I mounted the assembly in the tunnel access opening and used hard line 5150 instead of hose. Where did you mount your fuel filter?
 
Fuel Filter

Rick,

My plan was to mount two (one per wing) andair filter in wing root area. This is not my idea but came from here and I like because changing will be clean and out of cabin area and if you have a restriction problem at filter LH you switch tanks to RH and it will also switch filter.

Thanks
Jack
 
Timely Post

I have my EFII pump on order.

How did you attach the pump?

I like the look of your installation.
 
Back
Top