What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Spinner bulkhead grooves

rwarre

Well Known Member
On a previous thread I talked about a crack in my spinner bulkhead. I have since gotten a new rear bulkhead and installed a front bulkhead.(Catto prop). I flew my rv about a hour, got the prop balanced. I removed the spinner for inspection and found a groove developing on the front bulkhead. It matches the edge of my crush plate. I have contacted Catto and Sabre mfg. but thought I might see if the community had any insights on troubleshooting this issue. The person who balanced the prop said it was pretty far off the tollerance limit.
 
Back
Top