rtlongdon
Active Member
I just finished repairing an intermittent wiring issue on one of my CDI modules (yellow stripe 966-727's). The problem was a broken coil output wire (broken inside the jacketing). Each module has about 300 hours. I'm weighing options for when further issues crop up. That $1171 each price tag is eye watering.
I know there has been discussion of Ignitech CDI modules on the forum in the past, however has anyone actually installed them in an RV-12? I have communicated with multiple people who use them and love them, but no one with an RV-12. Mostly I'm curious where one might install them. I see Ignitech would like them installed off engine and preferably on the cockpit side of the firewall.
https://www.ignitech.cz/en/vyrobky/bikes/rotax/rotax_912_and_914/rotax_912_and_914.htm
Thanks!
I know there has been discussion of Ignitech CDI modules on the forum in the past, however has anyone actually installed them in an RV-12? I have communicated with multiple people who use them and love them, but no one with an RV-12. Mostly I'm curious where one might install them. I see Ignitech would like them installed off engine and preferably on the cockpit side of the firewall.
https://www.ignitech.cz/en/vyrobky/bikes/rotax/rotax_912_and_914/rotax_912_and_914.htm
Thanks!