What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

FADEC not recognized (No data on Lanes A\B)

jaytre

I'm New Here
Pretty sure I have a call to SteinAir in my near future, but hoping someone could suggestion additional troubleshooting steps I can try today. I'm seeing no data from the FADEC & isn't showing as detected. EIS appears to be operating normally (flashing green light). HIC is showing a solid green (or maybe yellow) light.

Steps I've tried:
1. Verified grounds to fuse box
2. Verified all fuses (both on power module & in fusebox)
3. Verified continuity to Power X3 from HIC
4. Verified continuity to GEA24 via pins 1-> 17 & 2->33
5. Reloaded config in GDU460
6. Verified continuity on the 2 FSP pins & 1 SBB pin on HIC d'sub

Anyone ever seen anything like this before?
Any additional troubleshooting steps anyone can think of?

Jw26aju.jpg

35kgXUs.jpg
 
Last edited:
BTW, here is how to scale "imgur" pics:

Scaling "imgur" pics: Add one of the scaling characters listed below before the ".jpg" in the image address.

Here are all the dimensions and letters to choose from:
s = Small Square (90×90)
b = Big Square (160×160)
t = Small Thumbnail (160×160)
m = Medium Thumbnail (320×320)
l = Large Thumbnail (640×640)
h = Huge Thumbnail (1024×1024)
 
Back
Top