What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Governor bracket interference

Tsabean

Active Member
fw61cl.jpg

I have a Woodward governor on an O-320 that I am trying to mount on an RV4.
The governor fits nicely in the firewall cutout but the Vans attachment bracket interferes with the footwell bump out.
Not sure if the attached picture will work but all that is required would be to rotate the entire unit about 25 degrees or so.
Reluctant to remove the 6 screws, not sure what might jump out.
Any suggestions would be appreciated.
Cheers, Tom
 
Back
Top