One of the first things that I noticed on my RV-9a was there was not a convenient place to hang my headsets after a flight. So initially, I set them on top of the dash and after a while I noticed that the steel frames on my Lightspeeds were scratching the plexiglas windscreen.
So, I built two fold out holders and attached them to a rib on the pilot and passenger side. I move it out of the way during a flight. I have used this setup for years and found it to be very neat place to hang headsets while not in use.
So, I built two fold out holders and attached them to a rib on the pilot and passenger side. I move it out of the way during a flight. I have used this setup for years and found it to be very neat place to hang headsets while not in use.
Last edited: