VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 01-21-2022, 09:06 AM
SeanB's Avatar
SeanB SeanB is offline
 
Join Date: Dec 2006
Location: Colorado Springs
Posts: 655
Default Canopy Fairing and Sika

Hello,

I still need to build the fiberglass fairing for my RV7 (tipper) canopy. The canopy is bonded with Sika and there is a bead along the front curve, where the fiberglass transition fairing will be added. Any issues laying fiberglass over the Sika? I could remove most of it in that area if it's better. Also, does everyone add the small metal clips along the bottom of the forward canopy that get buried into the fiberglass fairing? I'd rather not.

Thanks for any help!
__________________
SEAN BLAIR V7
Colorado Springs, CO
https://eaabuilderslog.org/?blprojec...&listcat=&sid=
2021 VAF SUPPORTER
Reply With Quote
  #2  
Old 01-21-2022, 09:18 AM
PhatRV PhatRV is online now
 
Join Date: Mar 2018
Location: Buena Park, California
Posts: 796
Default

There is an RV builder who painted over the sika section without any debonding. I think he used the epoxy primer over the sika then painted over the area that was primed. If you are using epoxy then I think it should adhere well. Just to be on the safe side, you may also want to scuff up the sika
__________________
RV8 standard build: 90% completed (90% to go)
Waiting to install wings to fuselage.
Days to Final Installation: 999
Days to AWC: 999
Days to First Flight: 999

Donation paid through 2022
Reply With Quote
  #3  
Old 01-21-2022, 10:26 AM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 5,213
Default Windshield trim

I layed up the windshield fairing as one piece. It was popped off, finished then Sikaflexed in place. Two clips on the windshield. One each side. They are hidden under the trim.
I did it just in case someone, someday has to replace the windshield.
__________________
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 12/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (3,000+ hours)
Empennage, wings, fuse, finishing kit done. Working FWF
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 10:24 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.