VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Fiberglass
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 06-08-2021, 11:51 AM
AAflyer's Avatar
AAflyer AAflyer is offline
 
Join Date: May 2009
Location: Fort Mill, South Carolina
Posts: 376
Cool K.I.S.S.

Quote:
Originally Posted by DanH View Post
slap some tape on the backside, wipe wet flox mix into the depression. cure, sand flush if needed, re-drill, countersink again.

Or just stop countersinking fiberglass. AN526's with nylon washers is the long term bulletproof solution.
Yep...I did THIS ^^^^

Hardly miss the .00005 knots at cruise.
__________________
Bruce Windom
QB RV-8 N148BW
First Flight: Oct '16
AeroSport Power IO-360 180hp w/dual P-Mags
Catto 3-blade, with black carbon spinner.
10" Dynon SkyviewTouch. That's ALL.
Reply With Quote
  #12  
Old 06-10-2021, 07:39 PM
Bcone1381 Bcone1381 is offline
 
Join Date: Dec 2015
Location: Chelsea, MI
Posts: 84
Default

Quote:
Originally Posted by AAflyer View Post
Yep...I did THIS ^^^^

Hardly miss the .00005 knots at cruise.
To help you understand why this works so well, understand that the Cotton Flox they are talking about when mixed with epoxy is rock hard. It also is cheap, light, and easy to get. If this is new to you...I suspect it is...then go for it. You wont mess it up. Just mix up a tablespoon of epoxy (stir of two minutes) in a paper cup, then add flox so its a constancy of between mayonnaise and peanut butter and then use a Hotel key card or credit card to wipe it over the hole you are repairing. You'll have it done in thirty minutes.
Reply With Quote
  #13  
Old 06-10-2021, 07:58 PM
RV10Pilot RV10Pilot is offline
 
Join Date: Jan 2005
Location: Medford, NJ USA
Posts: 428
Default

Thanks for all the help. Packing tape on the backside, wet epoxy flox mix. Coated the hole with neat epoxy and then applied the flox mix. A small piece of peel ply on the top and let it cure.

I drew a line from the center of the screw hole and marked 2" and 4". Put the fairing back on and then used the line and markings as a guide to drill the hole. Worked perfectly.
Attached Thumbnails
Click image for larger version

Name:	IMG_4616.jpg
Views:	44
Size:	264.0 KB
ID:	12477  Click image for larger version

Name:	IMG_4617.jpg
Views:	57
Size:	288.8 KB
ID:	12478  
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:31 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.