What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Primer on landing gear parts

rdamazio

Well Known Member
For those that are priming their parts, I'm wondering which parts of the landing gear you're applying primer to.

The parts I'm not sure about are: fork, smaller parts that attach around the brakes (these), axle extensions, elastomer pad, elastomer spacers, and the standoffs for attaching the towbar.

(I know the main gear legs should not get primer on the non-powdercoated bits (they receive grease instead), and of course the brakes and wheels themselves don't get primer. I also know that the brackets used to hold the wheel fairings should be primed)

Any advice?
(building a -10, if it makes a difference)

Thanks in advance
 
Back
Top