Replacing hinge pins on the cowling. Ordered/Rec ⅛, .120 from Vans and those are too big. Measured again and got steel welding rod 3/32 .093 and those will work. Vans sells .090 and Spruce sells .089. Why is there not a standard for these pins. Seems like they should be .093.
Van's Air Force
Don't miss anything! Register now for full access to the definitive RV support community.
Hinge pins
- Thread starter rwarre
- Start date
Go to https://www.mcmaster.com/tool-steel-rods and have a look around. I bought a few different sizes several years ago.
