What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Dynon Pitot Mast rivet sizes

Surfdoc

Member
Anyone know / remember the rivet callout for the Dynon Pitot mast installation to the lower skin and spar? Nothing in the manual... Thanks in advance for the help
 
Should be easy enough to calculate or measure. Place a 470 rivet from the inside facing out, so the tail is outside the skin and measure how much stick out you have. Then chose the correct 426 rivet and get to riveting!
 
AN426AD3-6

I think this is the size I used along the spar, but I just did what others said & checked the rivet length before setting them.
 
Back
Top