Home > VansAirForceForums

-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Prev Previous Post   Next Post Next
Old 01-17-2021, 10:32 PM
Michael Burbidge Michael Burbidge is offline
Join Date: May 2006
Location: Sammamish, WA
Posts: 672
Default Wing kit wiring harness

The wing kit came with wiring harness. I'm going with Garmin GX3 system. It came with 4 basic harnesses. Two for lighting, one for each wing (WH-00011) One for the roll servo (WH-00013) and one for the ADAHRS (WH-00012).

Will the WH-00013 and WH-00012 work out of the box with garmin roll servo and GSU-25?

Also, does the ADAHRS mounting bracket accommodate the GSU-25. Putting it inside the wing at that location looks like a very difficult spot for it in terms of maintenance. Any experience with this location would be appreciated.

I find the wiring harnesses that ship with the kit to be frustrating because there is so little information about how to apply them to Garmin GX3 and the CAN Bus.
Michael Burbidge
Sammamish, WA
RV-14A Wings
RV-9A Flying 340 hours!
Last Donation: December 2020
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 09:06 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.