VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-12/RV-12iS
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-05-2019, 08:29 PM
subpar_bucker subpar_bucker is offline
 
Join Date: Oct 2016
Location: Cranberry Twp, PA
Posts: 46
Default About to countersink the canopy front bow holes

Just want to double check because I cannot find this via google. The AACQ-4-4 rivet countersink angle is 100 degrees correct?
Reply With Quote
  #2  
Old 09-06-2019, 07:57 AM
John-G John-G is offline
 
Join Date: Jan 2012
Location: Northeast Ohio
Posts: 719
Default

Subpar-

It has been a while but if memory serves me correctly, I believe the AACQ-4-4 rivet has a 120° angle.

You could easily verify that by countersinking a piece of scrap metal using a 120° countersink then cut it in half with a band saw .... then verify the sides of the rivet mate nicely with the sides of the countersink.
__________________
John
http://www.dogaviation.com/

RV-12 Wings, Empennage, Fuselage, Finishing, Avionics and Powerplant kits all completed
Now Flying!!

Donation paid until September 2021
Reply With Quote
  #3  
Old 09-06-2019, 10:57 AM
JwWright57 JwWright57 is offline
 
Join Date: Dec 2016
Location: Charlotte, NC
Posts: 192
Default

Good suggestion John
__________________
-----------------------------------------
Jeff Wright, Charlotte NC
Rv-12 started!
Tail 99% done
Wings 99% done
12IS fuse kit 99% done
Finish kit 95% done
Avionics kit 1% done
Dues paid 2020
Reply With Quote
  #4  
Old 09-06-2019, 11:24 AM
dreed dreed is offline
 
Join Date: Nov 2016
Location: Camas, WA
Posts: 411
Default

big second on using scrap to verify. you can check the angle and get the microstop set perfectly
__________________
Dan Reed
Camas, WA
RV-7A - Slider in progress - N167DR (reserved)
Working on final assembly
2018/19/20 VAF dues paid
Reply With Quote
  #5  
Old 09-06-2019, 12:30 PM
kkmarshall kkmarshall is offline
 
Join Date: Sep 2014
Location: Central Tx
Posts: 186
Default

I believe all the pulled c/s rivets use a 120 degree.
__________________
Keith
329DR RV10-bought flying
Continually upgrading/tweaking
Reply With Quote
  #6  
Old 09-06-2019, 01:59 PM
rcarsey's Avatar
rcarsey rcarsey is offline
 
Join Date: Jul 2012
Location: North Brunswick, NJ
Posts: 200
Default

I just completed this step a few days ago and I confirmed it was 120 degrees by looking at the datasheet for it.. I had the same question.

http://www.avdel-global.com/fileadmi...LQ_AACQ_mm.pdf
__________________
Rob Carsey, North Brunswick NJ
RV-12iS (N713)
Completed 10/2020
Dues paid 2020
Reply With Quote
  #7  
Old 09-06-2019, 08:01 PM
subpar_bucker subpar_bucker is offline
 
Join Date: Oct 2016
Location: Cranberry Twp, PA
Posts: 46
Default

Thanks for all the replies everyone!
Reply With Quote
  #8  
Old 09-06-2019, 08:42 PM
AeroDog AeroDog is offline
 
Join Date: Aug 2011
Location: New London, NC (near Charlotte), Longmont, CO
Posts: 280
Default

Quote:
Originally Posted by kkmarshall View Post
I believe all the pulled c/s rivets use a 120 degree.
If all the pulled CS rivets are 120 degrees, which rivets are 100 degrees? I'm thinking there may have been times when I used the wrong countersink cutter. Nothing ever looked wrong after it was set, however.

Jerre
__________________
Empennage, fuselage and wing kits complete
Canopy in progress, engine in the hangar.
RV-12 120593 N42KJ reserved
http://webpages.uncc.edu/~hill
http://jerre-hill.blogspot.com
=VAF= dues paid 2021
Reply With Quote
  #9  
Old 09-06-2019, 09:58 PM
rv9builder rv9builder is offline
 
Join Date: Jan 2005
Location: Irvine, CA
Posts: 887
Default

Quote:
Originally Posted by AeroDog View Post
If all the pulled CS rivets are 120 degrees, which rivets are 100 degrees? I'm thinking there may have been times when I used the wrong countersink cutter. Nothing ever looked wrong after it was set, however.

Jerre
Solid AN rivets are 100 degrees (AN426AD-3-4, for example)
__________________
Mark
RV-12iS Fuselage
RV-9A Project: Sold

VAF donation made for 2020
Reply With Quote
  #10  
Old 09-07-2019, 08:18 AM
John-G John-G is offline
 
Join Date: Jan 2012
Location: Northeast Ohio
Posts: 719
Default

Quote:
Originally Posted by kkmarshall View Post
I believe all the pulled c/s rivets use a 120 degree.
Regarding the pulled rivets used on the RV-12 .... actually, there are some exceptions to the above statement. In particular, one that immediately comes to mind is the use of CCR264SS-3-2 rivets to secure dimpled nutplates ... their heads have a 100° taper. One example of their use is where a rivet squeezer does not have the clearance to squeeze a solid rivet ... such as the upper nutplate riveted onto the flange of a F-1215 seat rib.
__________________
John
http://www.dogaviation.com/

RV-12 Wings, Empennage, Fuselage, Finishing, Avionics and Powerplant kits all completed
Now Flying!!

Donation paid until September 2021

Last edited by John-G : 09-07-2019 at 08:36 AM.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:33 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.