What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Rudder help

Chipper G

Well Known Member
Struggling to find the distance or procedure for adjusting the rudder attach rod ends to the vertical I have the hardware callouts. Never mind
 
Last edited:
Dont have the measurement, but be sure to tighten the lock nuts after you get it set.
 
Van's gives you a suggested starting dimension on the drawing for each of the rod ends. Start with the top and bottom rod ends and check for uniform gap and lack of binding all around. When you're happy with that, install the middle rod end where the bolt doesn't bind.
 
Back
Top