Home > VansAirForceForums

-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

Old 01-22-2021, 05:23 PM
Anon455 Anon455 is offline
Join Date: Dec 2020
Posts: 51

Originally Posted by wirejock View Post
P60G2 is the wash primer Vans has been spraying on QBs for a very long time.
Ask SW and they will tell you it's not intended as a stand alone primer.
Search and you may find Vans test piece has been outside exposed for close to 15 years with no sign of corrosion.
I sprayed it inside and also sprayed it under Jet Flex. Gorilla Tape test has yet to rip any off. In fact, the one time I needed to remove it, it took scotchbrite and lacquer thinner and a lot of elbow grease.
Personally, I believe it's all about surface prep. Feel free to read my blog.
Thanks Larry - Right now I'm using Azko Noble 10P20-13. In your opinion, should I switch away from this?

Reply With Quote
Old 01-22-2021, 06:05 PM
wirejock's Avatar
wirejock wirejock is online now
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 4,180
Default Akzo

Originally Posted by DARV8 View Post
Thanks Larry - Right now I'm using Azko Noble 10P20-13. In your opinion, should I switch away from this?

No. Go with what you know. Success rate is better.
I have no first hand experience with Akzo but I have sprayed a lot of Kirker EnduroPrime. It's also a 2K epoxy. I'm sure it's just as durable if not more.
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 01/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (2,000+ hours)
HS SB, empennage, tanks, wings, fuse, working finishing kit
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 04:05 PM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.