Noise Reduction Headphones
One of my other hobbies is shooting. I got tired of sticking foam plugs in my ears and or doning ear muffs. On and off. In and out. Can't hear what the spotter is saying.
I bought a set of these. Walker's Razor Slim Electronic... https://www.amazon.com/dp/B01AAH8CMA...p_mob_ap_share
They work great at the range but recently I discovered shop use.
I've started sanding with a random orbital connected to a vacuum. Very loud. I also run it near the hand sanding block. Dust is almost completely contained.
The headphones dampen the noise as expected but they also allow voices and with the stereo cable, I just listened to the EAA Webinars perfectly.
Yes, our flight headset will do it but do you really want to get a $900 headset covered in dust?
__________________
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 12/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (3,000+ hours)
Empennage, wings, fuse, finishing kit done. Working FWF
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|
Linear Mode
