VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-14
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 01-15-2021, 09:57 AM
AndyWAUS AndyWAUS is offline
 
Join Date: Jun 2020
Location: Seattle, WA
Posts: 33
Default

By tight I meant they were fitting tight enough inside, with not much slack. Once I put a thin layer of the black sealer on them, it actually took considerable force to slide them in place. Thanks for advise, I'll do the straight edge measurement and look inside with a snake camera to check if they bonded to both sides. I'm thinking, since the ribs are only about 1" in height by 5" in length, even if they were cut to 97% of the original size, a 1/16" layer of sealer should compensate for that. Perhaps, I'm rationalizing.
__________________
Building an RV-10 since May 2020
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 05:16 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.