VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 01-30-2020, 11:24 AM
TXFlyGuy TXFlyGuy is offline
 
Join Date: May 2012
Location: Jazz Town, USA, TX
Posts: 505
Default Specific Fuel Consumption

What is the BSFC of a Lycoming or Continental engine?

Just for comparison, my V8 is between .40 and .50, with an average burn of .45.

Here are the latest numbers from the dyno runs...

4000 rpm:
24 inches = 345tq 260hp 19.5 gph
22 inches = 324tq 246hp 18.7 gph
21 inches = 303tq 235hp 16.2 gph

3500 rpm:
24 inches = 335tq 220hp 16.5 gph

From 4000 to 3500 the torque values are about the same but the hp drops about 40.

This comes in right at .45 lbs / hp / hr. Right on schedule for a high performance V8.
__________________
Annual dues paid - 6-13-2020
Reply With Quote
  #2  
Old 01-30-2020, 11:34 AM
Grum.man Grum.man is offline
 
Join Date: Aug 2014
Location: Statesville, NC
Posts: 27
Default

The IO-550 line gets around .37-.38 LOP at 75%
Reply With Quote
  #3  
Old 01-30-2020, 11:50 AM
TXFlyGuy TXFlyGuy is offline
 
Join Date: May 2012
Location: Jazz Town, USA, TX
Posts: 505
Default

Quote:
Originally Posted by Grum.man View Post
The IO-550 line gets around .37-.38 LOP at 75%
What is the hp/torque at 75% power? RPM / Manifold Pressure?

Is that pounds per hour per horsepower? If so, those are awesome numbers. We will not run LOP.
__________________
Annual dues paid - 6-13-2020
Reply With Quote
  #4  
Old 01-30-2020, 11:56 AM
Grum.man Grum.man is offline
 
Join Date: Aug 2014
Location: Statesville, NC
Posts: 27
Default

Quote:
Originally Posted by TXFlyGuy View Post
What is the hp/torque at 75% power? RPM / Manifold Pressure?

Is that pounds per hour per horsepower? If so, those are awesome numbers. We will not run LOP.
232 HP for an IO-550N. Fuel flow at 75% best econ is 88-90 lbs per hour. TQ isn't specified but calculated should be about 488 lb-ft

The IO-550G is better but is only 210 HP.
Reply With Quote
  #5  
Old 01-30-2020, 12:50 PM
TXFlyGuy TXFlyGuy is offline
 
Join Date: May 2012
Location: Jazz Town, USA, TX
Posts: 505
Default

Quote:
Originally Posted by Grum.man View Post
232 HP for an IO-550N. Fuel flow at 75% best econ is 88-90 lbs per hour. TQ isn't specified but calculated should be about 488 lb-ft

The IO-550G is better but is only 210 HP.
Impressive numbers, nearing diesel fuel burns. My numbers in the first post are at full rich (I think). I doubt that any leaning was done during the dyno runs.
__________________
Annual dues paid - 6-13-2020
Reply With Quote
  #6  
Old 05-04-2020, 11:22 AM
dlomheim dlomheim is offline
 
Join Date: Sep 2006
Location: (2OK2) OK City, OK
Posts: 383
Default Diesel Engine BSFC?

Quote:
Originally Posted by TXFlyGuy View Post
Impressive numbers, nearing diesel fuel burns. My numbers in the first post are at full rich (I think). I doubt that any leaning was done during the dyno runs.
Aren't Diesels more in the range of .26-.32?

Doug
RV-9A FWF / Mazda 13B
Reply With Quote
  #7  
Old 05-04-2020, 08:41 PM
scsmith scsmith is offline
 
Join Date: Jan 2008
Location: Ashland, OR
Posts: 2,805
Default

Quote:
Originally Posted by TXFlyGuy View Post
Impressive numbers, nearing diesel fuel burns. My numbers in the first post are at full rich (I think). I doubt that any leaning was done during the dyno runs.
What ECU are you using? Most modern automotive engines run pretty lean at mid-power. WOT, I'm not sure. Ross could chime in here.
__________________
Steve Smith
Aeronautical Engineer
RV-8 N825RV
IO-360 A1A
WW 200RV
"The Magic Carpet" Flying since Sept. 2009
Hobbs 635
LS6-15/18W sailplane SOLD
bought my old LS6-A back!!
VAF donation Dec 2020
Reply With Quote
  #8  
Old 05-05-2020, 05:30 AM
F1Boss's Avatar
F1Boss F1Boss is offline
 
Join Date: Aug 2006
Location: Taylor Texas
Posts: 835
Default 550G/N specs

Quote:
Originally Posted by Grum.man View Post
232 HP for an IO-550N. Fuel flow at 75% best econ is 88-90 lbs per hour. TQ isn't specified but calculated should be about 488 lb-ft

The IO-550G is better but is only 210 HP.
Using the std TQ/HP formulas, the 550N has 603lbs/ft of torque at 2700/30” where the Lyc 540 has 505lbs/ft at the same power setting. That is a substantial differrence.

I am pretty sure that the TCM 360 has 210HP - but at 2800RPM? Not sure.

The TCM 550G (280HP/2550RPM) can be converted to the N specs (310HP/2700RPM) by turning the little screw on the prop governor...

HP/Torque calculator: https://spicerparts.com/calculators/...que-calculator
__________________
Best,
Mark

"Not everyone needs a Rocket. Some folks, however, shouldn't live life without one.
You know who you are."
Budd Davisson, 1997

Last edited by F1Boss : 05-05-2020 at 05:36 AM. Reason: Added calculator
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:03 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.