VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 01-19-2022, 12:12 PM
Mike6A Mike6A is offline
 
Join Date: Apr 2021
Location: CA
Posts: 85
Default Adsb failure

Have been flying my echo for 2 years and received a letter from FAA that I failed my Balt report. Any ideas, waiting to hear from UAvionics.
Thanks
Reply With Quote
  #2  
Old 01-19-2022, 12:15 PM
BobTurner BobTurner is offline
 
Join Date: Dec 2011
Location: Livermore, CA
Posts: 8,174
Default

You mention two years, so I'll ask: When was your last transponder check? IIRC the Echo "listens" magically for the transponder signal, and gets the barometric altitude from that signal. So a weak or failing transponder could be the issue, too. (Unless you hard-wired the encoder data to the Echo.) Part of the magic is the transponder signal traveling thru aircraft wiring, so any changes might require an adjustment to the Echo's sensitivity setting for the transponder signal. It might be as simple as cleaning grease and grime off the transponder antenna.
Reply With Quote
  #3  
Old 01-19-2022, 12:33 PM
WingsOnWheels WingsOnWheels is offline
 
Join Date: Mar 2009
Location: Plano, TX
Posts: 2,295
Default

Quote:
Originally Posted by Mike6A View Post
Have been flying my echo for 2 years and received a letter from FAA that I failed my Balt report. Any ideas, waiting to hear from UAvionics.
Thanks
Pull your PAPR and see what is showing as the failure. Could be a configuration problem, GPS signal, or like noted above Altitude or squawk
__________________
Colin P.
RV-6A #20603
Complete 5/10/19
PP SEL / A&P
I donate every year on my B-Day (in Dec)
Reply With Quote
  #4  
Old 01-19-2022, 12:33 PM
Mike6A Mike6A is offline
 
Join Date: Apr 2021
Location: CA
Posts: 85
Default

It s hard wired to the transponder. The wire runs directly to the echo(no harness).
The belly is clean.
Reply With Quote
  #5  
Old 01-19-2022, 01:13 PM
OKAV8r OKAV8r is offline
 
Join Date: Feb 2007
Location: Seattle
Posts: 252
Default

I will "echo" the suggestion to fly and get a PAPR. With that, you will be able to determine if the Baro Alt failure is 100%, or only part of the time.
If it is part time, are you flying in the fringe areas of ADSB ground station (GBT) coverage?
Also, when you fly, take along an iPad connected to a Stratus receiver. That will allow you to monitor all of the ADSB out parameters real time. You can access the info from the map page, select settings, scroll to bottom of menu, select Stratus, then scroll down that menu to "ownship" and tap on that. That displays all of the information about your ADS-B out, and is color coded green for good, and red for bad.
Reply With Quote
  #6  
Old 01-19-2022, 05:28 PM
MacCool's Avatar
MacCool MacCool is offline
 
Join Date: Aug 2020
Location: central Minnesota
Posts: 980
Default

I have the same problem….Barometric altitude failed on a couple of different PAPRs. In my case, it happened on the first PAPR I ran after replacing my AFS 4500 with an AFS5400….for some reason the EchoUAT isn’t getting BALT encoding. All other ADS-B function IN and OUT are working great. The “manual” didn’t call for any serial pin changes in the 4500 -> 5400, but I suspect that something in the wiring is mis-pinned out of the EFIS. I hope your luck is better than mine. I appears to be an obscure problem on the various aviation forums where I’ve posted.


ETA: I second the PAPR advice, if you haven’t done that. In my case, the BALT failure is not 100%…it’s variable between 12% and 49%. Not that that information has provided a solution. Tells me more about what it isn’t than what it is.
__________________
RV-9A, 2011, bought flying
IO-320D1A (factory new), C/S
IFR equipped
AFS 5400/3500, G5, IFD440 navigator,
bunch of other stuff

Last edited by MacCool : 01-19-2022 at 05:33 PM.
Reply With Quote
  #7  
Old 01-19-2022, 06:54 PM
Mike6A Mike6A is offline
 
Join Date: Apr 2021
Location: CA
Posts: 85
Default

Heard from UAvionics it is a configuration problem. Thanks for the help.
Reply With Quote
  #8  
Old 05-06-2022, 06:45 AM
rwayne rwayne is offline
 
Join Date: Jan 2005
Posts: 122
Default BAlt failure

I had to replace my Uavionix Echo and am now getting the same failure on my ADS-B report. What was the configuration item that needed correcting?
Thanks.
Wayne
__________________
Wayne
RV10 N767W
Vidalia, GA
Reply With Quote
  #9  
Old 05-08-2022, 03:55 AM
Piper J3's Avatar
Piper J3 Piper J3 is offline
 
Join Date: Nov 2014
Location: Hinckley, Ohio
Posts: 2,703
Default Baro Alt - PAPR % Failure

I have echoUAT + SkyFYX-EXT that is hard wired with MUX cable to Garmin 327 transponder. When I run PAPR it always shows some % failure in Baro Alt - usually less than 2% failure and report is totally blue color - so I pass. I don’t know what allowable limit is before failure is indicated. It would be nice to know this. Three years ago, I stopped at FAA booth at KOSH and asked ADS-B specialist about this. He was able to pull up all my flights and analyze in great detail. He said Altitude Encoder or Transponder showed intermittent reporting of high altitude spikes. If I remember correctly spikes were +20K MSL. FAA’s advice was to try to fix problem. Guy wouldn’t tell allowable error…
-
Attached Thumbnails
Click image for larger version

Name:	Screen Shot 2022-05-08 at 5.44.37 AM.png
Views:	20
Size:	41.9 KB
ID:	25597  
__________________
-
Jim Stricker - EAA #499867
PPL/ASEL 1970 - Sport Pilot since 2007
80 hrs Flying Aeronca Chief 11AC N86203
1130 hrs Flying 46 Piper J-3 Cub N6841H
Bought Flying RV-12 #120058 Oct 2015 with 48TT - Hobbs now 760

LSRM-A Certificate 2016 for RV-12 N633CM
Special Thanks... EJ Trucks - USN Crew Chief A-4 Skyhawk
MJ Stricker (Father - CFI) - USAAF 1st Lt. Captain B-17H
Reply With Quote
  #10  
Old 05-08-2022, 04:09 AM
BH1166 BH1166 is offline
 
Join Date: Nov 2017
Location: Eatonton Georgia
Posts: 694
Default

I was told by uAvionics tech anything 6 or higher will cause a failure RED in the NIC NAC . Not sure if this is across the board. I found him correct when I was chasing an intermittent GPS antenna issue. I was surprised how quick after asking ,the FAA for a review they responded. YMMV
__________________
Butch
RV6A Purchased N72TX
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 12:21 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.