Why are certain plan sections marked Obsolete

[Gandalf]

I am finally going to tackle my canopy installation and looking to see if I still have the latest plans I checked my electronic USB Fob and found:

34_12(Obsolete).pdf

So my question is why is this section marked "Obsolete"?

My actual plans came with two new struts.

Jeff

[N8DAV8R]

Originally Posted by Gandalf

I am finally going to tackle my canopy installation and looking to see if I still have the latest plans I checked my electronic USB Fob and found:

34_12(Obsolete).pdf

So my question is why is this section marked "Obsolete"?

My actual plans came with two new struts.

Jeff

The USB stick has folders with plans for both the legacy and IS versions of the airplane. Those in the legacy folder that have been superseded by the IS version are labeled as obsolete.

[Gandalf]

Originally Posted by N8DAV8R

The USB stick has folders with plans for both the legacy and IS versions of the airplane. Those in the legacy folder that have been superseded by the IS version are labeled as obsolete.

Good to know!
Thanks.

[YME]

Heys guys,

What is this usb stick you are referring to?

Getting ready to start empennage kit.

[Bob Y]

This is what we’re talking about.

https://store.vansaircraft.com/rv-12...ans-rv-12.html

Now that you have access to the latest plans for free through the Van’s on-line store, it reduces the need for this, but it does put them all in one place for you. Of course, they will only be as current as they were when loaded on the thumb drive.

[YME]

Originally Posted by Bob Y

This is what we’re talking about.

https://store.vansaircraft.com/rv-12...ans-rv-12.html

Now that you have access to the latest plans for free through the Van’s on-line store, it reduces the need for this, but it does put them all in one place for you. Of course, they will only be as current as they were when loaded on the thumb drive.

Thanks for that info