I purchased partially built RV 10 project
The previous builder put these vents for avionics/ defrost
I am unable to find what fans would fit here
Need help
Thanks
I wanted a more directional defrost on the screen too so I used one of those diffusers as well - with a fan mounted on the sub panel.
3D printed up a shroud to join them.
Only been used in anger once but it is very effective.
The fan is a Comair Rotron Whiffet series.
I’ll try find the exact PN.
View attachment 43458
View attachment 43459
Thanks 7Nut!What a great idea!
Fan p/n WT12B3 19031101A
I wanted a more directional defrost on the screen too so I used one of those diffusers as well - with a fan mounted on the sub panel.
3D printed up a shroud to join them.
Only been used in anger once but it is very effective.
The fan is a Comair Rotron Whiffet series.
I’ll try find the exact PN.
View attachment 43458
View attachment 43459
Mine (and Richard C’s) came from Demon Tweeks in UK.
https://www.demon-tweeks.com/au/demon-tweeks-heater-demister-vent-737177/
I hope you're planning to install backshells to those "D" connectors. They need the strain relief.