Home > VansAirForceForums

-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
w/a Donation

VAF on Twitter:

Old 08-21-2023, 08:42 PM
riobison riobison is offline
Join Date: Jul 2011
Location: Oliver BC & Red Deer Alberta Canada
Posts: 641
Default Shoulder harness a pain when getting into the plane.

Moved from a RV 4 to an RV9A. Just breaking in my top overhaul on the O320 and enjoying the plane except for one thing.

Every single time I get into it the shoulder harness fall off the seat back and normally end up pinched behind the seat back to add to the frustration.

Never had this problem in the 4 but then again there was no where for the shoulder harness to slide off to.

Any suggestions such as some kind of bracket that I could attach to the seat back and run the harnesses through?



Last edited by riobison : 08-22-2023 at 11:19 AM. Reason: not getting attention
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -6. The time now is 01:00 AM.

The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.