I have the deluxe DJM throttle quadrants from Flyboy Accessories. Both front and rear quadrants. Problem now is I'm trying to figure out how to install it into the fuselage as it's being built. I did not get the Van's rear seat throttle kit as I wanted the nicer DJM throttles. Looking at other builders logs, there's several parts I'm missing. The clevis and pins are easy. The pushrod and side plate are much harder to figure out. The drawing from Van's, DWG OP-2 is also easy to order. I'm really hoping to avoid ordering the whole rear seat throttle kit, just to toss half of it in the trash.
From what I can tell, I need to order the side plate, pushrod and drawing from Van's. I'm hoping someone is able to give me part numbers so I order the correct pieces. Please, if there's anything else I'm missing, or other suggestions let me know.
From what I can tell, I need to order the side plate, pushrod and drawing from Van's. I'm hoping someone is able to give me part numbers so I order the correct pieces. Please, if there's anything else I'm missing, or other suggestions let me know.