What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Infinity flap switch wiring help

p51dplt

Well Known Member
I have an Infinity grip with only the PTT wired currently and would like to wire the flap toggle switch. I have a momentary up/off/down switch in the panel with all 6 poles wired, with the opposite corner poles jumped together.

Do I need a relay of some sort or can I make this work somehow? Not the brightest when it comes to wiring....

Thanks.
 
A schematic of your current wiring and a datasheet for the Infinity grip will help. A relay or two will probably be required.
 
I think that since the stick grip has a single pole switch, you'll need a relay or the Flap function on a VP-X.
 
I'm sure I'm a little late to the party with this but Digikey part number CKN1144-ND is a DPDT switch that I had put into my infinity grip that eliminated the need for a relay and worked great.
 
Back
Top