VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.






VAF on Twitter:
@VansAirForceNet

  #1  
Old 03-02-2022, 08:28 AM
Tsabean Tsabean is offline
 
Join Date: Oct 2014
Location: Nova Scotia
Posts: 80
Default iPad mini mount

Any suggestions on what works for mounting an iPad mini in the 4?
Reply With Quote
  #2  
Old 03-02-2022, 09:23 AM
fixnflyguy fixnflyguy is offline
 
Join Date: Jan 2006
Location: Winston-Salem, N.C.
Posts: 1,621
Default I have similar issue

I use a Nexus 7 tablet with AVARE for most of my travels, and with all my instrument (steam mostly) locations, switches and other things I don't want to cover up, I have learned to just use a simple knee pad and live with it. I have toyed with making a simple fold down shelf for the R/H side of the canopy/longeron area that I can adapt to hold my tablet, but I'm also interested in other ideas.
__________________
Bill E.
RV-4/N76WE
8A7 / Advance NC
Reply With Quote
  #3  
Old 03-02-2022, 10:47 AM
mike newall's Avatar
mike newall mike newall is offline
 
Join Date: Jan 2005
Location: Yorkshire, England
Posts: 2,377
Default

Ram mount - the ball is bolted on to the structure, the swivel and mount just screws on.
__________________
"I add a little excitement, a little spice to your lives, and all you do is complain!" - Q

Donated in 2022
Reply With Quote
  #4  
Old 03-02-2022, 10:56 AM
Mike S's Avatar
Mike S Mike S is online now
Senior Curmudgeon
 
Join Date: Sep 2005
Location: Dayton Airpark, NV A34
Posts: 16,546
Default

Ram also can be used with a suction cup mount.

I have a complete setup available, PM if interested.
__________________
Mike Starkey
VAF 909

Rv-10, N210LM.

Flying as of 12/4/2010

Phase 1 done, 2/4/2011

Sold after 240+ wonderful hours of flight.

"Flying the airplane is more important than radioing your plight to a person on the ground incapable of understanding or doing anything about it."
Reply With Quote
  #5  
Old 03-02-2022, 12:15 PM
Untainted123's Avatar
Untainted123 Untainted123 is offline
 
Join Date: Jan 2021
Location: Azle, TX
Posts: 194
Default Many Ways

There are many ways to accomplish getting the base secured. This is in my -6, so I know space is even more limited in the -4, but this is what I did.

I didn't really have any room on my panel to put the ball mount permanently, so I used the RAM Yoke Clamp and clamped it to the back side of my carb heat bowden cable (they have a probably 3/4" "cylinder" on the backside where the guts are). The cable cylinder seems strong, but I don't crank it down it gorilla style just in case it could be crushed. I then used the articulating arm to bring it just in front of my panel, and use their "EZ-Roll'r'" mount for an iPad mini.

I like the setup, and any type of larger iPad really is too big in our planes (except you -10 and -14 guys with all your luxurious cabin space). Hopefully this gives you some ideas:
Click image for larger version

Name:	rammountpic.jpg
Views:	103
Size:	72.8 KB
ID:	22880
Click image for larger version

Name:	rammountpic2.jpg
Views:	31
Size:	23.1 KB
ID:	22881
Click image for larger version

Name:	rammountpic3.jpg
Views:	40
Size:	21.1 KB
ID:	22882
Reply With Quote
  #6  
Old 03-02-2022, 12:55 PM
dpansier's Avatar
dpansier dpansier is online now
 
Join Date: Jan 2006
Location: Green Bay, WI (GRB)
Posts: 606
Default

I have used a Ram iPad mount for years and it worked well, what I did not like is the protective case must be removed from the iPad each time it was placed in the mount.
When the new iPad mini 6th gen was introduced, I placed an order and looked around for a mount sized to the new device. I found the Pivot T21A had some neat features allowing the included protective case to be used both in and out of the mount and a latch mechanism to quickly remove the iPad from the mount. I found the mount to be very well constructed. https://flyboys.com/collections/pivo...cts/pivot-t21a

Entering the site from steveo1kinevo youtube channel gets you a 15% discount off the products https://www.youtube.com/watch?v=pE1Gzo6KrWE

I have no connections to these websites, just a happy user.
__________________
Don Pansier
Green Bay, WI (GRB)
RV-7


Antennas for Experimental Aircraft
www.deltapopaviation.com
Reply With Quote
  #7  
Old 03-02-2022, 01:21 PM
Ironflight's Avatar
Ironflight Ironflight is offline
VAF Moderator / Line Boy
 
Join Date: Jan 2005
Location: Dayton, NV
Posts: 13,231
Default

I have a Mini that I use in the RV-3 and the little jet, and honestly, i just let it sit on my leg. The cockpits are small enough that it doesn’t; really go anywhere, and if I have a problem with glare, or the print is small enough that I need to get it closer to read, I don’t have to detach it from a mount - or even a strap.

Not for everyone, but works for me….

Paul
__________________
Paul F. Dye
Editor at Large - KITPLANES Magazine
RV-8 - N188PD - "Valkyrie"
RV-6 (By Marriage) - N164MS - "Mikey"
RV-3B - N13PL - "Tsamsiyu"
A&P, EAA Tech Counselor/Flight Advisor
Dayton Valley Airpark (A34)
http://Ironflight.com
Reply With Quote
  #8  
Old 03-02-2022, 01:21 PM
BH1166 BH1166 is offline
 
Join Date: Nov 2017
Location: Eatonton Georgia
Posts: 769
Default Ram X Grip for all tablets

Been using on mini for 4 years, various ways to attach the x grip to plane, i use ball mount. Will fit WITH PROTECTIVE CASE ATTACHED , Otterbox for me.
__________________
Butch
RV6A Purchased N72TX
Reply With Quote
  #9  
Old 03-02-2022, 02:01 PM
bkc3921's Avatar
bkc3921 bkc3921 is offline
 
Join Date: Jul 2007
Location: DuBois,Il
Posts: 201
Default Mygoflight

I would at least check mygoflight.com and see if they might have what you need. I have many of their mounts..they are all aluminum, very slick, and can be transferred (or removed) from the cockpit as needed. It's a very high quality product, that, in my opinion, look and works much better than the bulky, plastic RAM mounts. I've had both, and I feel the Mygoflight is far superior..but of course, get out your wallet.....YMMV.
__________________
Brian K. Morrow
DuBois,Il
N433BC "Muttley" RV-7A Flying
N433BM "Dastardly" RV-12is EMP, FUSE, WINGS, Done...FINISH and POWER PLANT in PROGRESS
Official Repeat Offender
"Maintain thy airspeed...Lest the earth arise and smite thee..."
Reply With Quote
  #10  
Old 03-02-2022, 08:47 PM
Jimzim Jimzim is offline
 
Join Date: Mar 2009
Location: Arvada, CO
Posts: 157
Default Homebuilt

As a fun weekend project, I fab’d my own. Just took some scrap aluminum sheet, .060, riveted on a couple of appropriately spaced pieces of scrap U channel to hold the mini. Then a simple bracket to hang the thing from the glare shield with a couple of screws. I then added a leg to the back which rests back against my existing panel to stabilize the mount.
Works well for me.
Use your imagination and have fun.
Jim
__________________
Jimzims
2015 RV7, flying
Lyc Thunderbolt 0-360 A1A
Bendix FI
Hartzell BA CS
Dual Pmags
Skyview
2022 dues gladly paid
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:35 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.