VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 01-13-2014, 09:50 PM
bearcatr2800 bearcatr2800 is offline
 
Join Date: Jan 2013
Location: Harrison Id
Posts: 18
Default RV-8 , F823-1 Rolling Detail

RV-8 , DWG 74 , Bottom left corner , rolling detail. RV-8 builders that would like to save a little time when you reach this step, can contact me and I will ship you my block and pre-drilled angle iron for this rolling detail. Worked good for me ! contact Bill, ......bearcat4@sm-email.com
Reply With Quote
  #2  
Old 04-16-2021, 02:15 PM
Tall_Order's Avatar
Tall_Order Tall_Order is offline
 
Join Date: May 2020
Location: Alberta, Canada
Posts: 9
Default 3/4 angle

Just gonna go and bevel the 2x4, but reading ahead:

The 3/4 aluminum angle called out for bending this- was it included in the kit?

I see you mentioned angle iron.... I happen to keep on hand a few lengths of mild steel guage bent into 1"x1" angle on a giant press(for general purpose non-aviation fabrication...).

Would anyone see a problem with substituting that for these skin bends? The way I read it looks like these get discarded along with the block.
__________________
RV-8A

Fuselage SB in progress
Empennage ready for pre-close inspection

Donated 2021

Last edited by Tall_Order : 04-16-2021 at 02:52 PM. Reason: Grammar
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:50 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.