VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-10
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-15-2021, 05:43 PM
MJarreau MJarreau is offline
 
Join Date: Apr 2007
Location: LA (Lower Alabama)
Posts: 277
Default Page 9-2, Step 6: Mating E-903 and E-904

Fluting went well (thanks to the EAA video!). Holes are all straight.

Can the webs of the two parts (which are back-to-back) be bowed apart just a bit if the rivets are properly installed?

Thanks,
Mike
__________________
DUES REMINDER: JAN 2022
Reply With Quote
  #2  
Old 04-15-2021, 08:48 PM
MJarreau MJarreau is offline
 
Join Date: Apr 2007
Location: LA (Lower Alabama)
Posts: 277
Default This was not really an issue.

It turned out we had not finished the fluting. Once that was done, everything was nice and flush.

FYI: the fluting method we used was learned from https://www.eaa.org/Videos/Hints-for.../1786897202001

Hope this helps someone else!

Best regards,
Mike
__________________
DUES REMINDER: JAN 2022
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:45 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.