VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 03-26-2021, 06:43 PM
Michael Burbidge Michael Burbidge is offline
 
Join Date: May 2006
Location: Sammamish, WA
Posts: 677
Default Starter/Alternator Link

When do you need a link between the starter and alternator? Here's my setup.

B&C Alternator Boss Mount
B&C Starter

Click image for larger version

Name:	2021-03-25 17.26.07.jpg
Views:	43
Size:	337.7 KB
ID:	9735
__________________
Michael Burbidge
Sammamish, WA
RV-14A Wings
RV-9A Flying 340 hours!
Last Donation: December 2020
Reply With Quote
  #2  
Old 03-26-2021, 08:10 PM
Canadian_JOY Canadian_JOY is offline
 
Join Date: Aug 2007
Location: Ontario, Canada
Posts: 2,390
Default

The answer from B&C when I asked was that, because they balance the alternator, no brace link is required to the starter. If a different alternator is used the brace link is required.
Reply With Quote
  #3  
Old 03-27-2021, 06:35 AM
BillL BillL is offline
 
Join Date: Sep 2007
Location: Central IL
Posts: 5,876
Default

I certainly have no data for this configuration, but every component will resonate at some frequency. That strap changes both the starter and the alternator. The PP alternator has the strap and it has a much shorter (mount face to pivot) bracket to the engine. Alternator certainly is one direct source of excitation but not the only one. Have seen 100+ lb hydraulic accessory pumps on a diesel flywheel housing vibrate like a couple of tuning forks breaking the housings. They were not self exciting.

All said - if B&C says they have no failures with that design, then I would accept that. Adding a link to an acceptable design will change the dynamics in an unknown way. If you check the mount torque regularly for 100 hrs and it is good, then just add the mount crack check to annual (CI) and you should be covered. Just my 2 cents.
__________________
Bill

RV-7
Lord Kelvin:
I often say that when you can measure what you are speaking about,
and express it in numbers, you know something about it; but when you
cannot measure it, when you cannot express it in numbers, your knowledge
is of a meager and unsatisfactory kind.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 04:37 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.