VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 11-29-2012, 06:49 PM
ILikePike ILikePike is offline
 
Join Date: Jan 2011
Location: Eatonton, GA
Posts: 216
Default RV-8 battery cable size?

Trying to figure out the big cables. I have an RV-8 with a rear battery, master contactor on battery tray and starter relay on firewall. I am planning on using 2 awg from the master to starter contactor for voltage drop. Also planning 6 awg for alternator to starter contactor via 60 amp ANL and 6 awg from starter relay to VP-X.
What is the recommended size for:
1. Battery to airframe
2. Battery to master contactor
3. Starter contactor to starter

Could go 2 awg for max power or 6 awg because the runs are short and more flexable to keep pressure off of the battery terminals.

Any thoughts?
__________________
Jeff Green
2016 RV-8 #82985
1968 E33C Aerobatic Bonanza
Pleased to donate Dec 2019
Reply With Quote
  #2  
Old 11-29-2012, 06:59 PM
SmilingJack's Avatar
SmilingJack SmilingJack is offline
 
Join Date: Dec 2010
Location: Hilton Head Island
Posts: 1,105
Default

I did exactly like you mapped out.

For 1,2 & 3 I used #2AWG
__________________
John Mastro
RV-8 (SOLD)
10 years of Awesomeness!
Reply With Quote
  #3  
Old 11-29-2012, 08:25 PM
mannanj's Avatar
mannanj mannanj is offline
 
Join Date: Jan 2005
Location: Mtns of N.E. Georgia
Posts: 1,322
Default Wire size

Quote:
Originally Posted by SmilingJack View Post
I did exactly like you mapped out.

For 1,2 & 3 I used #2AWG
Ditto above. I would run a second #2 wire for the airframe ground from the negative battery post forward to the firewall. Do not ground the battery locally at the rear battery mount. It will eventually let you down. Ground all your avionics etc. at the firewall terminus of the ground wire run. Some things such as landing lights, nav lights etc. can be locally grounded, but the important things should be grounded at that firewall ground terminal. This will keep radio noise, ground faults and other gremlins at bay.

Be sure to ground your engine crankcase and alternator frame to this same terminal.
__________________
LAUS DEO
Mannan J.Thomason, MSGT. USAF (RET)
VAF788
"Bucket List" checkoff in progress!
Reply With Quote
  #4  
Old 11-29-2012, 08:29 PM
Skyflyer Skyflyer is offline
 
Join Date: Mar 2007
Location: Sugar Land, TX
Posts: 144
Default 2 & 4 AWG

I have the same set up as you and used #2 for the long runs from master contactor to starter contactor and the same #2 on up to the starter. I used more flexible #4 for the short battery leads to the master contactor and the airframe ground. The alternator lead is #6. All works well with excellent cranking from an Odyssey 680.
__________________
Chuck McCluggage
Sugar Land, TX
RV-8 IO-375 WW 200RV
Flying
Reply With Quote
  #5  
Old 11-30-2012, 08:51 AM
Toobuilder's Avatar
Toobuilder Toobuilder is offline
 
Join Date: Jul 2009
Location: Mojave
Posts: 4,764
Default

#4 from bat to starter solenoid on firewall - #6 from there to starter. 200HP, no issues.
__________________
WARNING! Incorrect design and/or fabrication of aircraft and/or components may result in injury or death. Information presented in this post is based on my own experience - Reader has sole responsibility for determining accuracy or suitability for use.

Michael Robinson
______________
Harmon Rocket II -SDS EFI
RV-8 - SDS CPI
1940 Taylorcraft BL-65
1984 L39C
Reply With Quote
  #6  
Old 11-30-2012, 07:31 PM
vmirv8bldr's Avatar
vmirv8bldr vmirv8bldr is offline
 
Join Date: Jun 2005
Location: Eastvale, CA
Posts: 378
Default Similar

I have the same setup, -8 with rear mounted battery.

#2 Batt to Master contactor, Master Bus, Starter Solenoid, Starter and two ea #2AWG equivalent flexible braided straps for engine ground.

#6 to battery buss
#6 For Alternator to starter solenoid
__________________
Bart Filipiak
Eastvale, CA
RV-8 N74VB

Barrett IO-390
WW200RV
FLYING!!!!!!!
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:28 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.