ConAgraPilot
Active Member
Ok I have finished my wings and the fuselage is ordered. Now I have some downtime to do some future planning. I'm planning on the fuselage build to go fairly fast with the time I will have to work on it. My question is for you guys that have some combo of E/P Mags, one of each or two of the same, and running with the Vertical Power system. I'm planning on toggle switches instead of the standard keyed switch (just my personal preference). Reading on the emagair.com site that you will need either a switchable breaker or a breaker and a switch just for the testing of the system, which means I would have 4 switches. So can you do this breaker function within the VPX system by a soft key on a system like Dynon Skyview? It seams like you could use a "virtual" pull of a breaker in the VPX interface, but I'm new to that system and just learning. I searched the forum but couldn't find this answer, I'm sure its there, I just could find it so forgive me if I missed it!
Thanks for any info!
Michael
Thanks for any info!
Michael