This has only happened on one flight. It was the first flight after I rebooted from enabling the G3X autopilot flight control system monitoring. See this thread for that feature announcement: https://vansairforce.net/community/showthread.php?t=199025
On the ground, while taxiing, I got an alert message "Pitch Servo trim fault." Later, the "Roll servo trim fault" warning came up. These were intermittent on the ground and in flight. The autopilot worked correctly and both manual and automatic trim worked normally.
During the next flight, I did not see any warnings like this.
I can't find "trim fault" in the G3X Touch manual so I don't know what conditions can raise those warnings. Does anyone have a list of things to rule out?
On the ground, while taxiing, I got an alert message "Pitch Servo trim fault." Later, the "Roll servo trim fault" warning came up. These were intermittent on the ground and in flight. The autopilot worked correctly and both manual and automatic trim worked normally.
During the next flight, I did not see any warnings like this.
I can't find "trim fault" in the G3X Touch manual so I don't know what conditions can raise those warnings. Does anyone have a list of things to rule out?