What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Allen head AN526

219PB

Well Known Member
I thought it would relatively easy to find an Allen head version of the AN526 type of machine screw. Not looking for a certified piece of hardware. Just need an Allen head drive for a couple of my seat pan fasteners next to the side wall.

Been searching on the internet and they seem to be allusive. I found a couple of small button head screws but the OD of the head would require the addition of a washer. Figure there would be one similar to the AN526. Specifically, looking for a 8-32x1/2. Anyone have a source?
 
Those have even a smaller diameter head. Also, they are more apt to get hung up on the seat cushions.
 
MicroFasteners is a good source.

Also, McMaster-Carr has round head with washer type flange. These are what I use.
 
Last edited:
I just ordered and started using 8-32 x 1/2.
McMaster-Carr part #92196A194, stainless steel
6/32 x 1/2, part # 92196A148
 
Back
Top