Ok... I've searched quite a bit and haven't really found a method to locate the forward spinner bulkhead pre-drilled mounting screw holes. I'm doing a CS Hartzell prop.
My spinner is a new one that is gel coated grey so seeing through it with a light isn't going to work nor is taking off the gelcoat short of sanding.
Any suggestions out there would be great! Screwless? I have read about that and I'm considering doing that. But I do like the idea of fastening the spinner to the front bulkhead.
Any input appreciated!!
Thanks!!
My spinner is a new one that is gel coated grey so seeing through it with a light isn't going to work nor is taking off the gelcoat short of sanding.
Any suggestions out there would be great! Screwless? I have read about that and I'm considering doing that. But I do like the idea of fastening the spinner to the front bulkhead.
Any input appreciated!!
Thanks!!