I'm trying to reconcile the Dynon part numbers for EGT probes with Aircraft Spruce's numbers.
The EGT probes on the left side are labelled 100405-000 (label on the end of the wire) and these correspond to Aircraft Spruce PN 10-01169. But for the Right side, the probes are different (angled bayonets and longer wires) and are labelled 100404-000. Anybody know what Aircraft Spruce PN to order for these probes?
EDIT - I might be wrong on the labelled Dynon part number for the EGT probes on the right side - the 100404 appears to be a CHT probe. Nevertheless, the EGT probes that I have on the right side are different than the left side - the probes are curved at an angle of about 45 degrees outside the clamp to allow clearance for the cowl, and the wires appear to be longer. I'm having trouble finding these probes.
The EGT probes on the left side are labelled 100405-000 (label on the end of the wire) and these correspond to Aircraft Spruce PN 10-01169. But for the Right side, the probes are different (angled bayonets and longer wires) and are labelled 100404-000. Anybody know what Aircraft Spruce PN to order for these probes?
EDIT - I might be wrong on the labelled Dynon part number for the EGT probes on the right side - the 100404 appears to be a CHT probe. Nevertheless, the EGT probes that I have on the right side are different than the left side - the probes are curved at an angle of about 45 degrees outside the clamp to allow clearance for the cowl, and the wires appear to be longer. I'm having trouble finding these probes.
Last edited: