Im building my RV8 EMP kit and I was getting ready to order the parts for the SB 14-02-05 and I noticed the below verbiage.
Method of Compliance:
NOTE: Installation of this service bulletin as preventative maintenance is not
recommended. If cracking has occurred at an outboard hinge position, install a
doubler only at that position.
I'm assuming it makes sense to apply these doublers to new builds and all locations proactively. Correct?
Little confused on there statement with not being recommended with PM.
Method of Compliance:
NOTE: Installation of this service bulletin as preventative maintenance is not
recommended. If cracking has occurred at an outboard hinge position, install a
doubler only at that position.
I'm assuming it makes sense to apply these doublers to new builds and all locations proactively. Correct?
Little confused on there statement with not being recommended with PM.