VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 12-14-2011, 03:00 PM
Leonard_Smith_nz Leonard_Smith_nz is offline
 
Join Date: Feb 2005
Posts: 63
Default TMX O-360 + Micromonitor: Oil Temp Sensor

All,

I have this particular combination in my aircraft. After 5 years of faultless use the oil temperature sensor is playing up.

I'm almost 100% certain that I bought the sensor from Ron at Rocky Mountain Instruments, but I've not been able to get hold of him. I would appreciate if someone could assist with the identification of this particular part and possibly provide suggestions as to where it can be procured.

Image attached for clarification

Regards,
Leonard

[IMG][/IMG]
__________________
Leonard Smith
ZK-VRV (RV6: TMX O-360, Sensenich FP 85", VFR)
New Zealand
Reply With Quote
  #2  
Old 12-14-2011, 05:59 PM
Eric Petersen Eric Petersen is offline
 
Join Date: Oct 2007
Location: Minnetonka, Minnesota
Posts: 16
Default MicroMonitor Oil Temp Sensor

It has been a long time since I did this, but I think it is a sensor that the builder assembles using the part listed below.

Excerpt from Rocky Mountain Web site:
"Outside Air Temp or Oil Temp Sensor

This is an integrated circuit sensor AD590-JH. Digikey.com part number AD590JH. No other sensor compatible."

My assembly manual is at the hangar 35 miles away. I will look for it on my next visit. Hope this helps some...

Eric
Reply With Quote
  #3  
Old 12-14-2011, 06:16 PM
Eric Petersen Eric Petersen is offline
 
Join Date: Oct 2007
Location: Minnetonka, Minnesota
Posts: 16
Default Oil Temp Sensor Assembly Instructions

I found the Sensor assembly instructions on page 10 of the MicroMonitor Installation Manual on the Rocky Mountain web site (rkymtn.com). Good luck!

Eric
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 03:50 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.