I need to use Loc-tite (or equal) on the screws that hold my rear window to the roll bar . I've read dire warnings on these pages about the problems associated with Loctite contacting Plexiglass. Some said basically "no way, no how" can you let Loctite contact Plexi. Well, I took a piece of scrap Plexi (heaven knows, there's enough of THAT lying around) and put on a blob of real Loctite and pseudo Loctite (cheapo stuff called "thread locker") ...and let it set on there for 1/2 hour. When I wiped it off, there was no evidence whatsoever ... no mark, no crazing, no stain ... nothing. Can anyone tell me why the warnings I've seen several times in the past? Anyone have another "'speriment" to counter my simple test?