What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Control cable holes

wirejock

Well Known Member
Anyone have the three control cables handy?
I need the hole diameters for throttle, mix and prop.
I think it's .5", .625", .625".
 
Panel Holes For Throttle/Mixture/Prop Control Cables

If you are talking about hole sizes in the panel for the throttle, mixture and prop controls, I just completed this in the past few days on my RV-7 QB.

I am using the stock Van’s supplied control cables in the RV-7 IO-360-A1B6 angle valve finishing kit. I don’t know about others.

Throttle, ACS A-800BL0505-V, Panel nut thread ½ x 20, Panel hole is .500”

Mixture and Propeller, both ACS A-1760 series, Panel nut thread is ¾ x 16, Panel hole is .750”
 
Back
Top