I have a nearly complete wing kit I purchased a while back, and found out one of the ailerons was built BACKWARDS. Long story short, I ordered all new aileron parts from Vans, and the new parts have some differences. There is a place for a NutPlate on the aileron spar, where the wide bracket attaches. My drawings are old and have no reference to this. Does anyone have a new drawing to check and see what size nutplate I need and what size bolt???
Also if you have the smaller drawing from the pre plans to scan and send me that would be a BIG help.
Thanks
AL Grajek
Also if you have the smaller drawing from the pre plans to scan and send me that would be a BIG help.
Thanks
AL Grajek
