Hi all,
Bonding the cooling duct to the bottom cowling requires the mix of epoxy and flox.
Step 6 on page 49-14 says:
Install fiberglass strips 1 3/4 inch wide bridging the joint between the COWL 12 DUCT INTERFACE and the COWL 12 BOTTOM.
Do I need to use the flox mix for the fiberglass strips or pure epoxy (no flox in it)?
I'm thinking the fox mix would be thick substance and will not be able to wet the fiberglass strips.
Thanks !
Bonding the cooling duct to the bottom cowling requires the mix of epoxy and flox.
Step 6 on page 49-14 says:
Install fiberglass strips 1 3/4 inch wide bridging the joint between the COWL 12 DUCT INTERFACE and the COWL 12 BOTTOM.
Do I need to use the flox mix for the fiberglass strips or pure epoxy (no flox in it)?
I'm thinking the fox mix would be thick substance and will not be able to wet the fiberglass strips.
Thanks !