What's new
Van's Air Force

Don't miss anything! Register now for full access to the definitive RV support community.

Rudder Light

Brent Colvin

Well Known Member
Hi All,
I am ready to rivet the rudder together, have not made up my mind yet about light for rudder. Am leaning to put only wing lights and strobes. Has anybody ran wire through rudder after having it built? Is it required to have a light in tail? Thanks..Brent
 
The rudder light from Van's goes in the lower fairing, so there's really no drilling you need to do before riveting the rudder together, as far as I know. See this page on Dan's site.

Dave
 
Just put in some nuts

Yep - putting in either a strobe or a light is basically the same. Just make sure to epoxy in a couple of nuts for eventually mounting the light or strobe. :D
 
Back
Top