How I do it;
Loosen air cleaner clamp, remove air cleaner, right side has to be worked around hoses. Loosen carburetor boot clamp, pull carb back out of boot. At this point you can lift the carb a bit and release the bail and drop the bowl.
This may be what you are doing and having a tight boot is a challenge. I wiggle side to side, up and down trying not to rotate too much.
It can all be done without removing or disconnecting the control cables, just take care not to kink them while moving the carb around.
Live as if you were to die tomorrow. Learn as if you were to live forever.
-- Walt --
Last edited by seagull : 06-12-2021 at 12:26 PM.