VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Main > Safety
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-16-2018, 07:13 PM
Walt's Avatar
Walt Walt is offline
 
Join Date: Aug 2005
Location: Dallas/Ft Worth, TX
Posts: 6,613
Default Interesting day today, lots of smoke in the cockpit!

So while doing a small panel upgrade for a customer I had a bit a meltdown on his aircraft. The panel mounted Lightspeed CB, with open and bare terminals was connected directly to the battery, and was located right under the xpdr rack I was replacing (within about 1/8"). Well as soon as the rack came loose it came into contact the uninsulated terminals. (of course I was unaware at the time that this situation existed with a hot bus right below the rack).

I can tell you this, there was a ton of smoke accompanied by some small flames as the wiring began to burn, disintigrate and melt. All the switches and master were off so there was no killing this thing and it just continued to burn until the wiring finally burnt thru. I was scrambling to get the cowl off so I could disconnect the battery, but by the time I got if off the wires has already burnt thru and opened up.

So whats the moral to this story, do not run 'HOT' unprotected (no fuse, CB, contactor controlled) wires into the cockpit. This situation could have easily presented itself from any number of causes (loose hardware, wires, breaker, switches getting loose etc.) If this would have happened in flight there was no way to kill power to the burning wires, and trust me with a closed canopy you would be in serious trouble fast. I was really pretty amazed at how much smoke there was, in the air this likely would have ended badly.

For your Hot battery busses (this includes battery charger pig tails) there should ALWAYS be a fuse (or some type of circuit protection) located at the battery to prevent this kind of thing from happening.
__________________
Walt Aronow, DFW, TX (52F)

EXP Aircraft Services LLC
Specializing in RV Condition Inspections, Maintenance, Avionics Upgrades
Dynamic Prop Balancing, Pitot-Static Altmeter/Transponder Certification
FAA Certified Repair Station, AP/IA/FCC GROL, EAA Technical Counselor
Authorized Garmin G3X Dealer/Installer
RV7A built 2004, 2000+ hrs, New Titan IO-370, Bendix Mags, MTV-9 prop
Website: ExpAircraft.com, Email: walt@expaircraft.com, Cell: 972-746-5154

Last edited by Walt : 04-16-2018 at 08:44 PM.
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 06:40 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.