VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.

  #1  
Old 11-16-2015, 06:09 PM
thoma015 thoma015 is offline
 
Join Date: Apr 2015
Location: Oklahoma
Posts: 114
Default Rudder stiffeners not lining up

I am having trouble with my rudder stiffeners lining up. It seems like to me that the holes in the stiffeners are uniformly spaced, but the holes in the skin aren't.

The skins are older from a older kit i bought from a guy and the stiffeners are new from Vans (the kit didn't come with them).

The stiffeners holes are more widely spaced than the holes in the skin, could i flute the stiffeners to get them in line?





__________________
-Hawk
Reply With Quote
  #2  
Old 11-16-2015, 06:20 PM
wirejock's Avatar
wirejock wirejock is offline
 
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 5,118
Default Fluting

The holes are off lenthwise. Fluting won't change that.
Try moving them to other places or starting clekos in the middle.
I don't think the holes changed. That looks like a mis punched part but I am usually wrong. Experts here will know.
__________________
Larry Larson
Estes Park, CO
wirejock at yahoo dot com
Donated 12/01/2021, plus a little extra.
RV-7A #73391, N511RV reserved (3,000+ hours)
Empennage, wings, fuse, finishing kit done. Working FWF
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Reply With Quote
  #3  
Old 11-16-2015, 07:31 PM
David Paule David Paule is offline
 
Join Date: Dec 2009
Location: Boulder, CO
Posts: 5,264
Default

You can buy blank stiffener angle from Van's, cut them to length yourself, and drill them yourself, just like us RV-3B builders do. Takes a little time but it isn't a big deal.

Dave
Reply With Quote
  #4  
Old 11-17-2015, 05:37 AM
blueflyer's Avatar
blueflyer blueflyer is offline
 
Join Date: Nov 2008
Location: Shreveport, LA
Posts: 1,132
Default

If I recall, it took me several iterations to figure out the proper placement of the stiffeners. Just keep looking at it, you'll see how they fit. And as already pointed out, if you goof up your stiffeners in the process, you can buy more from Vans.
Reply With Quote
  #5  
Old 11-17-2015, 06:43 AM
jaradtke's Avatar
jaradtke jaradtke is offline
 
Join Date: Nov 2009
Location: Lutz FL
Posts: 167
Default

It looks like that stiffener is in the wrong sequence
__________________
Jeff Radtke
Lutz, FL
RV-7A - SOLD
RV-7A - New Build
Tail Feathers - Complete
ER Wings - Complete
Fuselage - Complete
Finish - Started

Last edited by jaradtke : 11-17-2015 at 06:45 AM.
Reply With Quote
  #6  
Old 11-17-2015, 09:41 PM
nbachert nbachert is offline
 
Join Date: May 2012
Location: California, MD
Posts: 351
Default

The -7 rudder changed a few years back didn't it? Maybe the stiffeners are from the newer rudder while the skins are from the old one.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 08:52 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.