VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Model Specific > RV-9/9A
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-07-2021, 02:31 PM
skelrad skelrad is offline
 
Join Date: Mar 2005
Location: Redmond, WA
Posts: 225
Default Riveting Inboard Rib/Spar in Horizontal Stab

Any tricks to riveting the inboard rib to the front spar in the horizontal stab of a RV9? I made quite a mess of the area trying to figure out the best way to rivet the main rib to the shim, spar, and nose rib. With the spar attach angle in place, getting a gun or bucking bar in there is awkward at best. By the time I got the rivets done I had really beat the life out of the manufactured head and didn't set the rivet as well as I would like. I tried putting the rivets in facing the other direction, which helped to some degree, but still not an ideal outcome. I'm interested in how other people tackled this as I decide whether or not to drill out and try again.
__________________
Brandon
RV-9A: Wings

Last edited by skelrad : 10-07-2021 at 03:30 PM.
Reply With Quote
  #2  
Old 10-07-2021, 02:48 PM
PilotjohnS PilotjohnS is offline
 
Join Date: Jan 2016
Location: Southwest
Posts: 1,821
Default been a while but

its been a while but i did not follow the exact order in the plans and i had to bend (gently) the rib to the side to get to the rivets. once riveted, i was ablt to re-bend the rib to the correct position.
__________________
John S

WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.

Dues paid 2021, worth every penny

RV9A- Status:
95% done, 10% left to go
Electrical/Panel done
Firewall Forward 75%done
Fiberglass 0%, thought i was building in metal?
www.pilotjohnsrv9.blogspot.com
Reply With Quote
  #3  
Old 10-07-2021, 04:14 PM
GeoffP's Avatar
GeoffP GeoffP is offline
 
Join Date: Sep 2018
Location: NSW, Australia
Posts: 224
Default Checked my build photos...

I remember this being a pain too, but it was 3 years ago and the scars have healed over now. I put the manufactured heads in from the rear, and used a long off-set rivet set in the gun.
__________________
RV-9, Empennage and Wings about done, Fuselage taking shape.
Reply With Quote
  #4  
Old 10-07-2021, 04:38 PM
Jslow2 Jslow2 is online now
 
Join Date: Dec 2020
Location: Cement City
Posts: 147
Default

They really need to change the instructions and have you install those ribs, with the spacer and nose ribs, before you put it in the skin, when you rivet the non associated main ribs in. Without the skin you can get a squeezer on all the rivets in the inner ribs.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 01:17 PM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.