|
-POSTING RULES
-Advertise in here!
-
Today's Posts
|
Insert Pics
Keep VAF
Going
Donate methods
Point your
camera app here
to donate fast.
VAF on Twitter:
@VansAirForceNet
|
05-12-2022, 12:15 AM
|
|
|
|
Join Date: Dec 2018
Location: Littleton, CO
Posts: 138
|
|
I used 295UV with the black Sika primer ($) and activator. I used the great tips Larry (aka Wirejock) documented in his article in Kit Planes magazine ( https://www.kitplanes.com/sikaflex-canopy-bond/) a few months ago and followed the Sika instructions. It’s a process to be sure but happy with results on canopy and windshield.
__________________
Dave
RV7 Slider N732DH
YIO-360-EXP Thunderbolt
Garmin G3X panel w/VPX
Littleton, CO & KCFO (aka CO Air and Space Port)
Photo log: https://flic.kr/ps/9jjZz
Last edited by motodave : 05-12-2022 at 10:24 AM.
Reason: added link to
|
06-21-2022, 02:29 AM
|
|
|
|
Join Date: Apr 2015
Location: Sydney, Australia
Posts: 70
|
|
Panel update
I have finished all my wiring requirements so I have started programming my VPX Sport digital circuit box defining which switches turn on the relevant circuits and specifying the amperage value for each one.
Consequently this has allowed me to turn on my avionics for the first time and allowed me to:-
1. Update the software to the latest version from Advanced.
2. Program the PFD and the MFD functionality plus specify which components are linked to them.
I have attached the photo below for you to view my instrument panel.
https://flic.kr/ps/3TnTEo
I have turned on all the systems in the VPX and thankfully so far I have not generated any smoke.
Cheers,
__________________
Gordon Griffin
RV-7A - beginning test flying
VH-NAK
IO-360-M1B
Catto 3 blade prop
|
06-22-2022, 01:29 PM
|
 |
|
|
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 5,869
|
|
Status
Status? Frustrated.
Everything Firewall Forward is dependent on something else. That assumes all the parts are available. If another widget is needed, there goes another order to a vendor and more time. My shop is a disaster. There are parts waiting and tools to install them all over. Today, an order finally arrived from Spruce. The plastic package seal must have opened and part fell out in the warehouse. Component can't be installed or even partially used because they are looking for the missing piece and don't have a replacement to send. Out of stock. Oh bother! My electronics are pending two HDX screens. My interior is on the waiting list for who knows when. On to something else. I may switch to fiberglass and paint for a while. At least I have all the stuff.
Thanks for letting me vent.
Edit...
Status? Still frustrated.
I called Spruce yesterday. They were out of the part and sent a message to warehouse to look for the missing piece. Promised to call me. No call. I called this morning. No joy. They backordered it and sent me an RMA to return the defective part. No pre-paid postage. Go figure. I have to pay to return a defective part. No doubt I'll get charged to ship the replacement.
__________________
Larry Larson
Estes Park, CO
E-mail: wirejock at yahoo dot com
Builder Blog: http://wirejockrv7a.blogspot.com
Donated 12/2022, plus a little extra.
RV-7A #73391, N511RV reserved
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
Last edited by wirejock : 06-23-2022 at 11:00 AM.
|
07-03-2022, 11:42 AM
|
|
|
|
Join Date: Jan 2018
Location: Taylor, AZ
Posts: 122
|
|
My 5-year-build Anniversary Update
Happy 4th of July!
July 1, 2017 was the day I started on the tail kit. Not sure where time has gone, but here's an update on where I'm at today:
I'm nearly done with the windscreen and I'm estimating that after this long, Holiday weekend I should be complete. After that, I'm done with everything I want to do here in my garage. I'm leaving the wheel pants and leg fairings for later.
Everything else is done! Wings completed, installed, rigged, etc. previously in my garage. VFR panel done. FWF, Engine, Prop, etc. all installed.
It's been all heart and soul! I've loved the build process. Definitely didn't enjoy certain parts of the build, but just carried on with the grind.
Thanks to VAF for keeping me motivated!
Ryan
__________________
Taylor, AZ (KTYL)
Builder #74649; RV7 N789YZ;
XIO-360-M1B built by JB Aircraft Engines
My flight bag is made by Dewalt!
|
07-03-2022, 02:59 PM
|
|
|
|
Join Date: Jan 2016
Location: Southwest, USA
Posts: 2,602
|
|
Really nice
Quote:
Originally Posted by ryankhallcpa@yahoo.com
Happy 4th of July!
July 1, 2017 was the day I started on the tail kit. Not sure where time has gone, but here's an update on where I'm at today:
I'm nearly done with the windscreen and I'm estimating that after this long, Holiday weekend I should be complete. After that, I'm done with everything I want to do here in my garage. I'm leaving the wheel pants and leg fairings for later.
Everything else is done! Wings completed, installed, rigged, etc. previously in my garage. VFR panel done. FWF, Engine, Prop, etc. all installed.
It's been all heart and soul! I've loved the build process. Definitely didn't enjoy certain parts of the build, but just carried on with the grind.
Thanks to VAF for keeping me motivated!
Ryan
|
Looks really nice. I cant believe you got the rear canopy skirt to work in metal. I am impressed. Good luck with the next phase!
__________________
John S
WARNING! Information presented in this post is my opinion. All users of info have sole responsibility for determining accuracy or suitability for their use.
Dues paid 2023, worth every penny
RV9A- Status:
98% done, 2% left to go
To Go: wing mounting, engine baffles, wing tips, move to airport
www.pilotjohnsrv9.blogspot.com
|
07-05-2022, 07:12 AM
|
 |
|
|
Join Date: Apr 2018
Location: Seattle
Posts: 293
|
|
Congrats Ryan! 
And congrats also to your son for joining the Long Blue Line! I see the USAFA decals on the tail.
__________________
Jon
2019 12iS SLSA
KAWO
|
07-06-2022, 04:07 PM
|
|
|
|
Join Date: Dec 2018
Location: Littleton, CO
Posts: 138
|
|
Progress tanks and leading edges
Feels like progress, finished up with the fuel tank riveting and pro-seal (what a messy job) and also got the leading edges riveted and test fitted. Planing on waiting a week or so to test the tanks for leaks, big time fingers crossed!
 Untitled by Dave Hock, on Flickr
 Untitled by Dave Hock, on Flickr
My fuselage is urging me to hurry up!
__________________
Dave
RV7 Slider N732DH
YIO-360-EXP Thunderbolt
Garmin G3X panel w/VPX
Littleton, CO & KCFO (aka CO Air and Space Port)
Photo log: https://flic.kr/ps/9jjZz
|
07-06-2022, 07:03 PM
|
|
|
|
Join Date: Oct 2005
Location: Estes Park, CO
Posts: 5,869
|
|
Wings
Nice work Dave!
__________________
Larry Larson
Estes Park, CO
E-mail: wirejock at yahoo dot com
Builder Blog: http://wirejockrv7a.blogspot.com
Donated 12/2022, plus a little extra.
RV-7A #73391, N511RV reserved
Disclaimer
I cannot be, nor will I be, held responsible if you try to do the same things I do and it does not work and/or causes you loss, injury, or even death in the process.
|
08-01-2022, 11:20 AM
|
|
|
|
Join Date: Jan 2018
Location: Taylor, AZ
Posts: 122
|
|
Milestones: Two-for-one Weekend!
This little piggy stayed home....from Oshkosh....to prepare for this past weekend. Truthfully, I've never been to Osh! Hmmm...maybe next year will be my year to go!
The big move!
Wings on!
Getting very close now.
Ryan
__________________
Taylor, AZ (KTYL)
Builder #74649; RV7 N789YZ;
XIO-360-M1B built by JB Aircraft Engines
My flight bag is made by Dewalt!
|
08-01-2022, 12:20 PM
|
 |
|
|
Join Date: Sep 2016
Location: Joseph, Oregon
Posts: 1,019
|
|
Quote:
Originally Posted by ryankhallcpa@yahoo.com
This little piggy stayed home....from Oshkosh....to prepare for this past weekend. Truthfully, I've never been to Osh! Hmmm...maybe next year will be my year to go!
The big move!
Wings on!
Getting very close now.
Ryan
|
Congratulations, I hope I’m not far behind
__________________
Michael Fleming
Joseph, OR
sagriver at icloud dot com
RV-7 Slider #74572
Started 11/2016
Empennage completed 11/2016
Ailerons and flaps completed 3/2017.
Wings completed 12/2017
Started on QB fuselage 01/2018
Sliding canopy mostly completed 10/2020
Wiring and Avionics harness completed 9/2/2021
FWF Completed 11/1/2022
Final assembly Started 11/10/2022
Wings on 11/12/2022
N526RM
Donated for 2022 and so should you 
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -6. The time now is 02:18 AM.
|
