UnPossible
Well Known Member
I have an IO-375 and switched from the standard oil cooler to the larger one from a RV-10 before first flight.
I had already drilled and run the mixture and prop cables and did not want to move/relocate them.
The set up in the picture below seems to be working pretty well, at least for the first few hours of flight testing.
I used some parts from the RV-10 oil cooler mount, but had to modify them quite a bit to get it to work on my 7.
Hope this helps,
Jason
I had already drilled and run the mixture and prop cables and did not want to move/relocate them.
The set up in the picture below seems to be working pretty well, at least for the first few hours of flight testing.
I used some parts from the RV-10 oil cooler mount, but had to modify them quite a bit to get it to work on my 7.
Hope this helps,
Jason