VansAirForceForums  
Home > VansAirForceForums

-POSTING RULES
-Advertise in here!
- Today's Posts | Insert Pics

Keep VAF Going
Donate methods

Point your
camera app here
to donate fast.


Go Back   VAF Forums > Avionics / Interiors / Fiberglass > Autopilots
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-13-2007, 12:22 AM
RVadmirer RVadmirer is offline
 
Join Date: Dec 2006
Location: Kalifornia
Posts: 466
Default Does anyone have one of these or want to build one?

--------------------------------------------------------------------------------

I would love one of these to go with my pitch trim.
A friend that builds a lot of electrical things says it's as easy to build several as it is to just do one, and the price of the boards goes down with quantity. The fellow that designed it quit making them.

http://hometown.aol.com/ccady/eztrim.htm

From his web site:

EZ-Trim
Altitude Hold Unit

Description & Specifications

What is it?

The Ez-Trim is a small low cost unit that provides basic altitude hold function for homebuilts. I wanted a economical unit for my E-Racer canard. I could not find one, so I started designing my own. After several months and over half a dozen different test units, I had a unit that worked. It has been used and tested with a MAC pitch trim servo attached to the PTH trim lever and the Strong pitch trim servo. It will maintain the selected altitude very well in smooth air conditons. In turbulence it will keep trying but you may prefer to fly manually. The key is getting the unit adjusted to the plane properly using the response adjustments provided. It has front panel adjustment screws to allow you to adjust its response to your particular homebuilt.

It is intended to provide missing altitude hold when used with a wing leveler like the Navaid Devices unit. It sends control to the relays that control the electric pitch trim servo. The unit is designed to provide altitude hold function using a pitch trim servo through relays. The unit does not have the current capacity to directly drive the servo.

Since the unit controls using the pitch trim it is easy to override if there is a malfunction.
Reply With Quote
 


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -6. The time now is 11:51 AM.


The VAFForums come to you courtesy Delta Romeo, LLC. By viewing and participating in them you agree to build your plane using standardized methods and practices and to fly it safely and in accordance with the laws governing the country you are located in.