The supplied cork gasket seems like a future leak waiting to happen. Searched forums and found many have opted to proseal in lieu of the cork gasket.
That being said I have a question about the instructions. From the plans “ Rivet the T-407 and the platenuts in place. The gasket under the T-708 cover plate will seal these rivets, so they do not have to be set with tank sealant.”
If you omit the cork gasket should you set these rivets with proseal, or should you proceed verbatim the instructions and consider the proseal used in lieu of the cork to be the gasket?
That being said I have a question about the instructions. From the plans “ Rivet the T-407 and the platenuts in place. The gasket under the T-708 cover plate will seal these rivets, so they do not have to be set with tank sealant.”
If you omit the cork gasket should you set these rivets with proseal, or should you proceed verbatim the instructions and consider the proseal used in lieu of the cork to be the gasket?